2023 Realistic Verified Free Cisco 300-610 Exam Questions
300-610 Real Exam Questions and Answers FREE
NEW QUESTION # 114
A network engineer is using a Cisco UCS environment connected to a Fibre Channel storage array. The Cisco UCS environment must be connected to an existing SAN network, and several Cisco MDS 9000 Series Switches must be added to increase storage density. The solution must not exhaust the SAN network from the list of available domain IDs after connecting Also, most of the SAN traffic must be mapped from the Cisco UCS blades to a specific group of the fabric interconnect ports Which two features must be deployed to meet these requirements? (Choose two.)
- A. end host mode
- B. static PIN grouping
- C. priority flow control
- D. N-Port lD virtualization
- E. dynamic port pinning
Answer: A,D
NEW QUESTION # 115
Refer to the exhibit.
The Cisco Nexus Series Switch with hostname Nexus! is the default gateway for server A and server B Both servers must have reachability to the internet; however, server A internet traffic must pass through the firewall for deep packet inspection. Also, the firewall must inspect any communication between server A and server B.
Which solution must be applied to separate the data plane path for server A and server B?
- A. VLAN
- B. VRF
- C. VXLAN
- D. VDC
Answer: B
NEW QUESTION # 116
Refer to the exhibit.
The FCoE packets fail to be forwarded through the switch. What is the minimum MTU QoS requirement for the FCoE to work?
- A. 2158 bytes
- B. 9000 bytes
- C. 2240 bytes
- D. 2000 bytes
Answer: D
NEW QUESTION # 117
An engineer needs an orchestration and monitoring tool that should be used for managing the storage networks and VXLAN fabrics. The tool should also allow support built-in dashboard and real-time health summary for managed devices. Which tool meets these requirements?
- A. Cisco Intersight
- B. Puppet
- C. Ansible
- D. Cisco DCNM
Answer: D
NEW QUESTION # 118
Which address pool is used when a vHBA template is created?
- A. MAC
- B. IP
- C. UUID
- D. WWPN
Answer: D
Explanation:
Section: Automation Design
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/gui/config/guide/2-1/ b_UCSM_GUI_Configuration_Guide_2_1/b_UCSM_GUI_Configuration_Guide_2_1_chapter_011010.html
NEW QUESTION # 119
An engineer configured the OSPF protocol in the vPC topology. During the catastrophic failure of one of the vPC the member switches, the traffic was routed to a black hole. This route was caused by the long convergence time caused by the delay of the of the vPC member switch reboot. After the failure, the engineer rebooted both switches, but the secondary switch powered on before the primary one. It caused all the vPCs to be shut down due to consistency-check violations. Which two features must be used to prevent these situations from happening in the future? (Choose two.)
- A. ip arp synchronize
- B. auto-recovery
- C. delay restore
- D. peer-gateway
- E. system priority
Answer: B,C
Explanation:
System priority is related to LACP, not vPC, so it is out. ARP s
Reference:
https://www.cisco.com/c/en/us/support/docs/ios-nx-os-software/nx-os-software/212589-understanding-vpc-election-process.html
NEW QUESTION # 120
An architect needs vendor-agnostic technology to orchestrate and automate a customer network with scripts. The technology must support running ad-hoc scripts from the CLI and support a deployment of scripts based on a large, readily available set of support libraries. Which technology must the architect choose?
- A. Cisco Intersight
- B. Cisco Power Tool
- C. Python
- D. Puppet
Answer: D
NEW QUESTION # 121
Refer to the exhibit A Cisco engineer is configuring a next-generation Cisco HyperFlex HX data platform with 2 x Cisco UCS 6248UP fabric interconnects. 8 x Cisco HX-Series HX240c-M4SX servers, plus 8 x Cisco UCS B200-M4 blade servers Cisco UCS 5108 blade chassis, and Cisco UCS 2204XP fabric extenders The solution is configured with HX Release 4 5(2a) using VMware ESXi 7 0 U2 After the engineer migrates all customer VMs to the new solution platform, the engineer decides to create HX Native snapshots for all the VMs The engineer performs the operation and notices that some of the VMs are not creating snapshots. What is the most probable reason that the HX Native snapshots are not created?
- A. The source disk is thick provisioned
- B. The node has insufficient datastore space
- C. Virtual machines are in suspended state
- D. The servers have duplicate names
Answer: A
NEW QUESTION # 122
An engineer is designing a Multichassis EtherChannel topology in which two switches must appear as a single device to a third downstream switch? Which two technologies meet this requirement? (Choose two.)
- A. 802.1q
- B. FEX
- C. HSRP
- D. vPC
- E. VSS
Answer: D,E
Explanation:
Section: Compute Design
Explanation/Reference: https://www.cisco.com/c/dam/en/us/products/collateral/switches/nexus-7000-series-switches/C07-
572835-00_NX-OS_vPC_DG.pdf
NEW QUESTION # 123
A cloud service provider is managing day-2 operations of over 200 blade servers installed in the Cisco UCS environment. This pool of network resources is providing virtual networks to their customers. To successfully operate this environment, frequent changes to vNICs and other operational policies are required across multiple UCS domains. The operations team must streamline these repetitive tasks. Which orchestration tool must be used to meet this requirement?
- A. Cisco ACI Multisite Orchestrator
- B. Cisco UCS Manager
- C. Cisco UCS Director
- D. Cisco DAN Center
Answer: A
NEW QUESTION # 124
Which orchestration tool provides a graphical interface to manage LAN and SAN fabrics?
- A. Cisco Data Center Network Manager
- B. Cisco Nexus Fabric Manager
- C. Cisco CloudCenter
- D. Cisco Virtual Topology System
Answer: A
Explanation:
Section: Automation Design
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/DCNM_OLH/SAN_Client/fmhelp/ fmc.html#34479
NEW QUESTION # 125
An engineer finishes the initial set up of a VXLAN EVPN network. The engineer is asked to plan for connectivity that supports redundancy and extends multiple virtual routing and forwarding domains. The requirement is to use the same default gateway addressing across all leaf switches that belong to the VXLAN network. Which two solution must be used to meet these requirements? (Choose two)
- A. DC interconnect
- B. spanning tree protocol
- C. Inter-site network
- D. VRF-lite
- E. Distributed anycast gateway
Answer: A,E
Explanation:
https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-12/configuration_guide/vxlan/b_1612_bgp_evpn_vxlan_9300_cg/configuring_evpn_vxlan_anycast_gateway.html
https://www.cisco.com/c/en/us/products/collateral/switches/nexus-9000-series-switches/white-paper-c11-739942.html
NEW QUESTION # 126
An engineer must build a VXLAN flood-and-learned network. The customer requires the solution to be based on the IETF documented practice in RFC 7348. The solution must use broadcast, unknown unicast, and multicast (BUM) and include the efficient BUM and short BUM replication modes that use only shared trees. Which technology meets these requirements?
- A. Bidirectional PIM
- B. PIM SSM
- C. MVPN
- D. PIM sparse mode
Answer: A
NEW QUESTION # 127
Which factor determines the choice of platform designing a Cisco HyperFlex infrastructure to support computer-aided design applications?
- A. storage capacity
- B. processor count
- C. network speed
- D. GPU support
Answer: A
Explanation:
https://www.cisco.com/c/dam/en/us/products/collateral/hyperconverged-infrastructure/hyperflex-hx-series/whitepaper-c11-740243.pdf
https://www.cisco.com/c/dam/en/us/products/collateral/hyperconverged-infrastructure/hyperflex-hx-series/hx-220c-m5-specsheet.pdf
NEW QUESTION # 128
Refer to the exhibit.
Which template is used when a vHBA template pair is created for a specific server that inherits its attributes from an existing template?
- A. Primary
- B. Initial
- C. Secondary
- D. Updating
Answer: B
NEW QUESTION # 129
......
Exam Dumps 300-610 Practice Free Latest Cisco Practice Tests: https://testking.exams-boost.com/300-610-valid-materials.html