[Jan 10, 2022] C_IBP_2105 PDF Recently Updated Questions Dumps to Improve Exam Score
C_IBP_2105 Dumps Full Questions with Free PDF Questions to Pass
C_IBP_2105 Exam Certification Details:
| Languages: | English |
| Cut Score: | 64% |
| Level: | Associate |
| Exam: | 80 questions |
SAP C_IBP_2105 Exam Description:
The "SAP Certified Application Associate - SAP Integrated Business Planning" certification exam verifies that the candidate possesses the basic knowledge in the area of the SAP supply chain planning. This certificate proves that the candidate has a basic overall understanding within this consultant profile of the industry solutions, and can implement this knowledge practically in projects under guidance of an experienced consultant. It is recommended as an entry-level qualification to allow consultants to get acquainted with the fundamentals of SAP Integrated Business Planning. Please note that this 2105 version of the exam takes part in the Stay Current with SAP Global Certification program. Once you pass this version of the exam, make sure that you start your stay current process. You will be required to take the quarterly stay current assessment for all subsequent SAP IBP releases via the SAP Learning Hub starting with the 2108 release to maintain your SAP IBP consultant certification status and badge. In order to participate in the stay current program and access the stay current enablement and assessment, you will need at minimum an SAP Learning Hub, edition for IoT and Digital Supply Chain subscription. (https://training.sap.com/learninghub)
NEW QUESTION 20
While modeling for a large machine with high capital needs, you need it to run cost effectively with minimum utilization, even if it means producing more than demand. Which solution would apply to this scenario? Note: There are 2 correct Answers to this question.
- A. Capacity leveling will be possible for production and storage resources.
- B. Enough demands can be pulled forward and pull production will occur.
- C. Excess stock can be generated and will need to be staged in an overflow warehouse.
- D. Balance can be achieved between excessive prebuild and minimum utilization by incorporating violation costs.
Answer: B,D
NEW QUESTION 21
You have set up infinite S&OP heuristics for unconstrained planning. What must you do to model inputs as constraints? Note: There are 2 correct Answers to this question.
- A. Enter transportation lead times.
- B. Create product substitutions.
- C. Set minimum and maximum lot sizes.
- D. Model adjusted transport receipts.
Answer: A,D
NEW QUESTION 22
You are modeling a substitution scenario associated with a promotion. What are some of the Master Data parameters that you need to maintain to ensure desired results generated by the optimizer? Note:
There are 2 correct Answers to this question.
- A. Location Product Sub Cost Rate
- B. Loc-Prod Subst Valid-From Date
- C. Promotion duration
- D. Flag 'Disable Substitution of Location Products'
Answer: B,C
NEW QUESTION 23
You have set up a planning area and data is available. You adjust the necessary time profile settings and run the consistency check. Which settings can you change and still run a successful consistency check?
Note: There are 2 correct Answers to this question.
- A. Change the description of the attributes in the time profile.
- B. Add a new time profile level to the time profile.
- C. Remove an attribute assigned to the time profile level if the attribute is used in a planning level.
- D. Change the past and future horizon of the levels in the time profile.
Answer: A,D
NEW QUESTION 24
What differentiates the Create New (Simple copy) and the Create New with Dependencies (Advanced copy) functions of a planning area? Note: There are 2 correct Answers to this question.
- A. Master data is only shared between the original and the new planning area when you use the Create New (Simple copy) function.
- B. Associated attributes are only shared between the original and the new planning area when you use the Create New (Simple copy) function.
- C. The planning view favorites are only copied when you use the Advanced copy.
- D. A copy of the time profile is only created when you use the Create New with Dependencies (Advanced copy) function.
Answer: A,D
NEW QUESTION 25
What are some of the prerequisites for configuring a planning area that results in a successful consistency check? Note: There are 2 correct Answers to this question.
- A. Configure at most two input key figures on the same planning level in a key figure calculation.
- B. Assign the compound master data type and its component master data types.
- C. Configure at least one calculated key figure for the planning area.
- D. Specify a planning horizon in the planning area for each level of the assigned time profile.
Answer: B,D
NEW QUESTION 26
Which of the following key functions are supported by SAP IBP for sales and operations? Note: There are
2 correct Answers to this question.
- A. Manual creation of feasible constrained plans
- B. An advanced demand planning process
- C. A basic demand planning process
- D. Finite resource planning
Answer: C,D
NEW QUESTION 27
Which of the following approaches could you take to reduce run times of an optimizer? Note: There are
2 correct Answers to this question.
- A. Avoid using telescopic time buckets.
- B. Split into multiple planning areas to support weekly vs. daily planning needs.
- C. Increase the use of incremental lot size beyond the frozen horizon.
- D. Use a subnetwork ID to reduce the size of the problem.
Answer: A,D
NEW QUESTION 28
What function would you use to configure a year-to-date calculation?
- A. Rolling Aggregation
- B. Cumulative Aggregation
- C. Dynamic Rolling Aggregation
- D. Last Period Aggregation
Answer: B
NEW QUESTION 29
Model configuration allows the attributes of a master data type to be assigned as key figures. Which features are relevant for this type of object?
- A. This object contains user-defined criteria that monitor execution of business plans.
- B. This type of key figure is not usually stored and it cannot be set to editable.
- C. This object is not exposed to the user in planning views or modeling.
- D. This object provides a single value for a unique planning combination.
Answer: D
NEW QUESTION 30
Which library is used by the forecasting engine for the demand sensing algorithm?
- A. Predictive analytics library
- B. Heuristics library
- C. Demand library
- D. Supply chain algorithm library
Answer: D
NEW QUESTION 31
You want to set up demand sensing to analyze demand changes in execution or close to execution windows. Which of the following conditions must you consider during the setup? Note: There are 2 correct Answers to this question.
- A. The result generates sensed demand data at the monthly time granularity for the full time horizon.
- B. It is mandatory to load historical lag-based snapshot data.
- C. Set up the forecast model to be executed at product-location level.
- D. At setup test the system to run the demand sensing (full) algorithm weekly and the demand sensing (update) on a daily basis.
Answer: B,D
NEW QUESTION 32
Where can we see the results of Time Series analysis in SAP IBP?
- A. Time Series Property Attribute in Customer
- B. Time Series Property Attribute in Customer Source
- C. Time Series Property Attribute in Customer Product
- D. Time Series Property Attribute in Product
Answer: D
NEW QUESTION 33
You run a what-if analysis and use the scenario planning function. Which actions can you perform? Note:
There are 3 correct Answers to this question.
- A. Run a scenario-specific demand sensing job.
- B. Run a scenario-specific inventory optimization job.
- C. Share data with other users.
- D. Change scenario-specific master data.
- E. Display data in analytics.
Answer: B,C,E
NEW QUESTION 34
You need to define a new logic for a key figure to drive values from the PERPRODCUSTREGION level to the PERPRODCUST level. Which of the following configuration options are possible for this process?
Note: There are 2 correct Answers to this question.
- A. Splitting the values from detailed to aggregated level by using copy operator
- B. Splitting the values from aggregated to detailed level based on time profile attribute
- C. Splitting the values from aggregated to detailed level using multiplication by the proportions
- D. Splitting the values from aggregated to detailed level based on stored split-factor key figure
Answer: C,D
NEW QUESTION 35
Which header name displays are available in the Report Options menu of the SAP IBP Excel interface?
Note: There are 2 correct Answers to this question.
- A. Business meaning, as defined in configuration
- B. Full unique name including the dimension and technical name
- C. Caption, as defined in configuration for the default name
- D. Changed member names that the user had created
Answer: A,B
NEW QUESTION 36
You want to restrict value entries outside of a specified range into a key figure. What setting will you use to achieve that goal?
- A. Select Protect Active Worksheet in the About section of SAP IBP tab
- B. IBP -> Lock Selected cells in IBP Formatting Sheet tab
- C. By restricting data input in the Key Figure Configuration app
- D. IBP -> Data Validation in IBP Formatting Sheet tab
Answer: C
NEW QUESTION 37
What setting is mandatory in the Manage Lifecycle Planning app when introducing a new product?
- A. Define which phase-in and phase-out profiles can be used within Lifecycle Planning
- B. Define which is the attribute ID for the Lifecycle profiles
- C. Define at least one attribute of the planning area which represents the Product ID
- D. Define which key figure can be used as sales history for new products
Answer: D
NEW QUESTION 38
How can you make charts and dashboards private?
- A. Enable the relevant settings in the Analytics Advanced and Dashboards Advanced applications.
- B. Choose only relevant key figures and filters in the Analytics Advanced application.
- C. Set restrictions for charts in the Permission filter application.
- D. Enable the relevant settings in the global configuration parameters.
Answer: D
NEW QUESTION 39
You create a planning filter using an SAP IBP Fiori app. Which of the following objects can it be applied to? Note: There are 2 correct Answers to this question.
- A. Planning view templates in the SAP IBP add-in for Microsoft Excel
- B. Jobs in the Applications Jobs app
- C. Supply chain graph in Supply Chain Network app
- D. Snapshot operator in the SAP IBP add-in for Microsoft Excel
Answer: A,B
NEW QUESTION 40
You define fixing for a key figure. Which of the following functions are available for this key figure? Note:
There are 2 correct Answers to this question.
- A. Fixing is possible for a certain quantity of a key figure value.
- B. Fixing is possible for manually editable key figures.
- C. Fixing is possible for system editable key figures.
- D. Fixing is possible for a certain period, including all child values in the hierarchy.
Answer: B,D
NEW QUESTION 41
What are some of the available ABC segmentation methods in IBP? Note: There are 2 correct Answers to this question.
- A. By Number of Items (Sorted Average)
- B. By Pareto Principle (Sorted and Calculated Values)
- C. By Number of Items (Sorted Values)
- D. By Pareto Principle (Sorted and Cumulated %)
Answer: B,C
NEW QUESTION 42
Which property of an attribute will allow it to be used as an attribute as a key figure?
- A. Type DECIMAL
- B. Type INTEGER
- C. Type NAVCHAR
- D. Type TIMESTAMP
Answer: A
NEW QUESTION 43
......
SAP C_IBP_2105 Certification Exam Topics:
| Topic Areas | Topic Details, Courses, Books |
|---|---|
| Key Figures & Attributes > 12% | Create and use key figures and attributes. |
| Analytics and Reporting < 8% | Define and view information with user-defined charts and dashboards. |
| S&OP Review < 8% | Describe how IBP extends the logic of S&OP in the network using advanced demand and supply planning integrated with financial plans. |
| User Interface > 12% | Use the Fiori Launchpad to customize the UI, work with Excel UI |
| Inventory < 8% | Optimize inventory in the supply chain utilizing algorithms that derive inventory targets. |
| Supply and Response > 12% | Configure supply planning, run various solvers to generate planning results |
| Demand Planning 8% - 12% | Create statistical forecast using historical data with basic methods. |
| General Configuration of a Planning Area > 12% | Display, create, copy, edit, check, and activate a planning area. |
100% Updated SAP C_IBP_2105 Enterprise PDF Dumps: https://testking.exams-boost.com/C_IBP_2105-valid-materials.html