[May 11, 2024] Get New NCP-MCI-6.5 Practice Test Questions Answers
NCP-MCI-6.5 Dumps and Exam Test Engine
NEW QUESTION # 30
An administrator responsible for a VDl environment needs to investigate reports of slow logins. The administrator finds that increasing the number of vCPUs from 2 to 4 will reduce the login times. Production workloads are consuming 75% of the host CPU on the cluster. The administrator increases the vCPU count on all of the VDl VMs.
What are two impacts on the cluster? (Choose two)
- A. Increase memory utilization%
- B. Increasing CPU counts will decrease memory utilization
- C. Increase CPU ready%
- D. Increase CPU utilization%
Answer: C,D
Explanation:
According to the web search results, the two impacts on the cluster that will result from increasing the vCPU count on all of the VDI VMs are:
Increase CPU utilization%: CPU utilization is the percentage of time that a CPU is busy executing instructions5. By increasing the vCPU count on all of the VDI VMs, the administrator will increase the demand for CPU resources on the cluster, which will increase the CPU utilization percentage6.
Increase CPU ready%: CPU ready is the percentage of time that a vCPU is ready to run but is waiting for a physical CPU to become available5. By increasing the vCPU count on all of the VDI VMs, the administrator will increase the contention for physical CPU resources on the cluster, which will increase the CPU ready percentage6. A high CPU ready percentage can indicate performance issues such as latency or slowdowns5.
NEW QUESTION # 31
An administrator wants to create a trunked interface on a VM on AOS 5.15x.
Which two steps should the administrator take first to achieve this? (Choose two)
- A. Log in over PE web UI.
- B. SSH to CVM.
- C. Update VM dialog.
- D. Use acli
Answer: B,D
NEW QUESTION # 32
An administrator is working with Nutanix Support and needs to provide logs for troubleshooting an issue. The cluster is located in a secure environment. Data such as IP addresses and VM names cannot be shared.
Which method should be used to anonymize the log data sent to Nutanix Support?
- A.
- B.
- C.
- D.
Answer: D
NEW QUESTION # 33
An administrator notices that most of the VMs in the cluster are on one host. Users report that an application seems to respond slowly. The application server VM has significantly more memory assigned to it than other VMs.
How should the administrator fix this issue?
- A. Add more memory to the VM.
- B. Migrate the VM to a different host.
- C. Reduce the amount of memory assigned to the VM.
- D. Increase the memory on the CVM.
Answer: B
NEW QUESTION # 34
A node with Erasure Coding fails.
What is the impact?
- A. The node stops utilizing Erasure Coding.
- B. Potentially increased amount of data stored in the SSD tier.
- C. AQS unable to do deduplication during the Erasure Coding failure.
- D. Increased Controller VM CPU Load.
Answer: B
Explanation:
When a node with Erasure Coding fails, the cluster will automatically rebuild the missing data using replication factor (RF) 2 or 3, depending on the cluster configuration. This means that the data that was previously stored using Erasure Coding will now be stored using full copies, which may increase the amount of data stored in the SSD tier1.
NEW QUESTION # 35
An administrator needs to provide access for a user to view real-time performance metric for all VMs on all clusters across the datacenter.
Which method accomplishes this with the least effort and ongoing maintenance?
- A. Configure AD authentication create a custom role, assign the user to the role, and apply the role to all clusters and VMs
- B. Configure IDP authentication and assign the user to the Cluster Admin role in Prism Central.
- C. Configure AD authentication and assign the user to the Viewer role in Prism Element.
Answer: A
NEW QUESTION # 36
On a Nutanix cluster, what does Network Segmentation refer to?
- A. Isolating management traffic from storage replication traffic.
- B. Physically separating management traffic from guest VM traffic.
- C. A distributed firewall for security VM to VM traffic.
- D. Isolating intra-cluster traffic from guest VM traffic.
Answer: D
Explanation:
network segmentation on Nutanix clusters refers to creating a separate network for service-specific communication and isolating different types of traffic over selected VLANs or physical interfaces.
https://next.nutanix.com/ncm-intelligent-operations-formerly-prism-pro-ultimate-26/network-segmentation-isolating-service-specific-traffic-39463
https://next.nutanix.com/how-it-works-22/network-segmentation-basics-38414
NEW QUESTION # 37
What does Nutanix recommend when setting up the node networkring?
- A. Include at least two physically interfaces in every bond.
- B. Combine NIC models from different vendors in the same bond.
- C. Include NIC models from different vendors in the same bond
- D. Combine NIC models from different vendors in the same bond.
Answer: A
NEW QUESTION # 38
An administrator is working with Nutanix Support and needs to provide logs for troubleshooting an issue. The cluster is located in a secure environment. Data such as IP addresses and VM names cannot be shared.
Which method should be used to anonymize the log data sent to Nutanix Support?
- A.
- B.
- C.
- D.
Answer: C
NEW QUESTION # 39
In the event of a disk failure, which process will immediately ad automatically scans Cassandra to find all data previously hosted on the failed disk, and all disks in that node?
- A. Genesis
- B. Stargate
- C. Curator
- D. Prism
Answer: C
NEW QUESTION # 40
Refer to the exhibit.
An administrator is adding a new node to a cluster. The node has been imaged to the same versions of AHV and AOS that the cluster running, configured with appropriate IP addresses, and br0-up has been configured the same the existing uplink bonds When attempting to add the node to the cluster with the Expand Cluster function in Prism , the cluster is unable to find the new node.
Based on the above output from the new node, what is most likely the cause of this issue?
- A. The ports on the upstream switch are not configured for LACP.
- B. There is a firewall blocking the discovery traffic from the tlu
- C. LACP configuration must be completed after cluster expansion
- D. The existing and the expansion node are on different VLANs.
Answer: D
Explanation:
The correct answer is B. The existing and the expansion node are on different VLANs.
The output shows that the new node has a br0-up bond with four interfaces: eth0, eth1, eth2, and eth3. The bond is configured with LACP active and LACP fallback set to false. This means that the bond will only work if the upstream switch supports LACP and is configured to form an LACP group with the four interfaces.
However, the output also shows that the bond has no IP address assigned to it, which indicates that the bond is not operational. One possible reason for this is that the existing and the expansion node are on different VLANs, and the upstream switch is not configured to allow the VLAN traffic on the LACP group. This would prevent the new node from communicating with the cluster and being discovered by the Expand Cluster function in Prism.
To verify this, the administrator can check the VLAN configuration on the upstream switch and compare it with the existing nodes. Alternatively, the administrator can use the "manage_ovs show_uplinks" command on an existing node and compare the output with the new node. If there is a VLAN mismatch, the administrator can either change the VLAN configuration on the switch or on the new node to match the existing nodes.
NEW QUESTION # 41
An administrator needs to limit the amount of storage space that data stored in single container can consume.
Which action should the administrator take?
- A. Store VM snapshots in a different container
- B. Set an advertised capacity for the container
- C. Thick prevision the container
- D. Enable reservation for rebuild capacity
Answer: B
Explanation:
Explanation
The best way for the administrator to limit the amount of storage space that data stored in a single container can consume is to set an advertised capacity for the container. This will ensure that the data stored in the container doesn't exceed the set limit, and it will also help prevent any potential performance issues due to resource contention. Additionally, the administrator should consider thick provisioning the container, which will pre-allocate the amount of storage space that can be used by the container. This will help ensure that the data stored in the container doesn't exceed the advertised capacity.
NEW QUESTION # 42
An administrator adds a node with older generation processors to an existing AHV cluster with newer generation processors. What is the effect on live migration?
- A. Live migration of VMs is prevented between newer and older processors.
- B. Live migration is prevented until the administrator manually changes the newer processor level.
- C. Live migration is prevented until the administrator enables the legacy migration option.
- D. Live migration continues to function as expected and VMs can move to any AHV host.
Answer: A
NEW QUESTION # 43
How should an administrator correct an SSL error when connecting to a Nutanix cluster?
- A. Create a new SSL certificate for the cluster signed by an AD certificate authority
- B. Create a new self-signed certificate for the cluster with a 4096 bit key
- C. Add the SSL certificate to the workstation's trusted people store
- D. Add the SSL certificate to an AD group policy applied to all computer objects
Answer: A
NEW QUESTION # 44
The Update Source for LCM has been configured as shown in the exhibit. Inventory is failing consistently.
What is the likely cause of this issue?
- A. The administrator does not have a valid portal account.
- B. Port 80 is blocked by a firewall.
- C. The license assigned to the cluster has expired.
- D. Port 433 Is blocked by a firewall.
Answer: B
Explanation:
According to the image description, the update source for LCM is configured to use the Nutanix Portal URL, which is a web address that requires internet access. The LCM inventory operation needs to download the latest manifest file and module files from the Nutanix Portal URL using port 801. If port 80 is blocked by a firewall, the LCM inventory will fail with an error message such as "Failed to get size of file at 5" or "The requested URL returned error: 403 Forbidden" as shown in the web search results23. To resolve this issue, the firewall rules need to be updated to allow port 80 traffic from the CVMs to the Nutanix Portal URL1.
NEW QUESTION # 45
......
Nutanix NCP-MCI-6.5 exam is designed for IT professionals who want to validate their skills and knowledge in implementing, managing, and administering Nutanix technology across multiple cloud environments. Nutanix Certified Professional - Multicloud Infrastructure (NCP-MCI) v6.5 exam certification exam is an advanced-level exam that is intended for professionals who have already achieved the Nutanix Certified Professional (NCP) certification.
2024 New Exams-boost NCP-MCI-6.5 PDF Recently Updated Questions: https://testking.exams-boost.com/NCP-MCI-6.5-valid-materials.html