Valid NS0-183 Test Answers & Network Appliance NS0-183 Exam PDF
Network Appliance NS0-183 Certification Real 2023 Mock Exam
The NS0-183 exam is designed to test an individual's knowledge of NetApp storage systems running on the ONTAP operating system. NS0-183 exam includes multiple-choice and scenario-based questions that test an individual's understanding of storage installation, configuration, and maintenance. Candidates are also tested on their knowledge of data protection, troubleshooting, and performance optimization.
Network Appliance NS0-183 certification exam is designed for IT professionals who want to validate their skills and knowledge in the installation and configuration of NetApp storage systems. NetApp Storage Installation Engineer, ONTAP certification is intended for individuals who work with NetApp storage systems and are responsible for implementing, configuring, and managing these systems in a production environment. The NS0-183 exam is one of the most prestigious and industry-recognized certification exams for storage installation engineers.
NEW QUESTION # 26
When you set up a new 2-node switchless cluster running ONTAP 9.5, which IP subnet is used for the automatic IP assignment on cluster ports?
- A. 192.168.1.0/24
- B. 10.10.0.0/16
- C. 10.0.0.0/8
- D. 169.254.0.0/16
Answer: D
NEW QUESTION # 27
An iSCSI LIF fails to migrate during a storage failover test.
In this scenario, why did the LIF not migrate?
- A. LIF failover was not enabled.
- B. LIFs that serve block protocols do not failover.
- C. The failover policy was not configured.
- D. A failover port was not defined.
Answer: B
NEW QUESTION # 28
Click the Exhibit button.
Your ONTAP cluster shows the cluster network errors that are shown in the event log.
What is used by ONTAP software to log the errors that are shown in the exhibit?
- A. AutoSupport
- B. EMS
- C. SNMP
- D. BGP
Answer: B
NEW QUESTION # 29
A customer has a current AFF ASA A700 cluster and they want to expand the cluster by adding a second AFF ASA A700 HA pair.
In this scenario, which step would be required to accomplish this task?
- A. Install a BES-53248 cluster switch and convert the AFF ASA A700 from a switchless to switch cluster.
- B. Enable ALUA between the two HA pairs to allow cluster backend traffic.
- C. Install a Brocade FC switch and create zoning between the original cluster and the new cluster.
- D. The customer will need to create a separate cluster for the second AFF ASA A700 pair.
Answer: D
Explanation:
With Ontap 9.7 ASA can only be a stand alone HA cluster. With Ontap 9.8 (not part of this exam) the cluster can be expanded to 12 nodes The following text is part of the TR4515, page 6 With ONTAP 9.7, NetApp introduced AFF ASA systems, which feature symmetric active-active topology, as shown in Figure 2. The ASA supports SAN (block protocols) only and is built on a single HA pair. It currently supports FC and iSCSI protocols, and support for NVMe protocols and larger clusters are expected in later releases.
NEW QUESTION # 30
Before starting a base installation on an AFF A400, you need to find out the default cluster interconnect ports for the AFF A400 controllers.
In this scenario, which three resources would you use to find this information? (Choose three.)
- A. AFF FAS Documentation Center
- B. Hardware Universe (HWU)
- C. Interoperability Matrix Tool (IMT)
- D. hardware installation setup poster
- E. Active IQ Unified Manager
Answer: A,B,D
NEW QUESTION # 31
You are using a NetApp CN1610 cluster-interconnect switch and need to connect a new AFF A800A node to the switch.
In this scenario, how many Ethernet ports per node are required on each switch?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION # 32
You have to disable a switch that is connected to a port on your FAS2750. You notice that the LIFs that are associated with this port are migrated to a port that is not expected.
In this scenario, what would cause this behavior?
- A. The network failover port is not licensed.
- B. There are no online ports within the same failover group.
- C. The broadcast domain is configured incorrectly.
- D. The network port is configured incorrectly.
Answer: C
NEW QUESTION # 33
In an ONTAP 9.7 cluster, which LIF role is used for sending AutoSupport, establishing Network Time Protocol (NTP), and loading software updates?
- A. cluster LIF
- B. data LIF
- C. cluster management LIF
- D. node management LIF
Answer: D
Explanation:
https://docs.netapp.com/us-en/ontap/networking/lif_roles95.html#lif-compatibility-with-port-types
NEW QUESTION # 34
You are installing a new ONTAP 9.7 cluster and attaching the cluster to two separate networks. Your customer has indicated that the same range of client IP addresses are used on both networks and that the networks are never allowed to communicate with each other.
In this scenario, which ONTAP feature must be configured to securely allow all clients to access ONTAP NAS protocols?
- A. IPspaces
- B. broadcast domains
- C. BGP
- D. routing
Answer: B
Explanation:
Explanation/Reference: https://www.netapp.com/media/16885-tr-4182.pdf (9)
NEW QUESTION # 35
Node 3 has taken over Node 4. You are attempting to access Node 4 on its management interface but cannot do it. In this scenario, how would you access Node 4's management interface?
- A. You should use SSH directly to one of the cluster interconnect switches; from there, you can use SSH to the node management on node 4.
- B. Connect to the node management on Node 3 and then use the HA interconnect to access node 4.
- C. You have not waited long enough for the failover timeout for a node management LIF; there is a broadcast domain configured for this situation.
- D. You must use the Service Processor; node management LIFS do not fall over between nodes.
Answer: D
NEW QUESTION # 36
Click the Exhibit button.
A customer has two Cisco 40GbE data switches. They want to connect the switches to an AFF A400 HA pair. The switches and the AFF A400 are approximately seven meters apart.
Referring to the exhibit, which two supported actions would allow you to accomplish this task? (Choose two.)
- A. Relocate the switches or the AFF A400 so that the distance is less than five meters.
- B. Change the requirement for Ethernet cables.
- C. Change the requirement for optical cables.
- D. Install 10 meter NetApp supported copper cables.
Answer: A,C
NEW QUESTION # 37
Your customer wants a newly installed AFF C190 cluster to send SNMP notifications to a trap host called OVERWATCH01.
In this scenario, which two statements are correct? (Choose two.)
- A. Configure an SNMP community string on the cluster.
- B. Configure a firewall policy and allow SNMP.
- C. Configure a trap host on the cluster.
- D. Configure DNS on the cluster.
Answer: C,D
Explanation:
https://kb.netapp.com/Advice_and_Troubleshooting/Data_Storage_Software/ONTAP_OS/How_to_configure_SNMP_monitoring_on_DATA_ONTAP
NEW QUESTION # 38
What is the maximum number of data disks that a RAID-TEC RAID group has?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
NEW QUESTION # 39
You have set up a new 2-node switchless cluster and want to verify that the failover is configured correctly.
In this scenario, which two commands accomplish this task? (Choose two.)
- A. storage failover show
- B. storage failover show-takeover
- C. cluster ring show
- D. cluster ha show
Answer: A,D
NEW QUESTION # 40
Click the Exhibit button.
Referring to the exhibit, what information is forwarded to syslog after you enter the scripted install commands? (Choose two.)
- A. AutoSupport messages
- B. command history
- C. EMS messages
- D. SNMP traps
Answer: B,C
NEW QUESTION # 41
Which statement describes an SVM?
- A. An SVM is a node in the cluster.
- B. An SVM is a logical device that shares data.
- C. An SVM is a storage volume type.
- D. An SVM is a logical network interface.
Answer: B
NEW QUESTION # 42
Click the Exhibit button.
Referring to the exhibit, what information is forwarded to syslog after you enter the scripted install commands? (Choose two.)
- A. command history
- B. EMS messages
- C. AutoSupport messages
- D. SNMP traps
Answer: A,C
NEW QUESTION # 43
You install a new FAS2650 HA with a DS224C disk shelf and ONTAP 9.5 on a customer site.
Referring to the exhibit, which steps are required to get an HA cabled system?
- A. 1. Insert a cable from right controller port 0a to IOMB port 2, and from port 0b to IOMA port 3. 2. Insert a cable from left controller port 0a to IOMA port 2, and from port 0b to IOMB port 3.
- B. 1. Insert a cable from right controller port 0a to IOMB port 1, and from port 0b to IOMA port 4. 2. Insert a cable from left controller port 0a to IOMA port 1, and from port 0b to IOMB port 4. 3. Cable the out-of-band ACP.
- C. 1. Insert a cable from right controller port 0a to IOMA port 1, and from port 0b to IOMB port 3. 2. Insert a cable from left controller port 0a to IOMB port 1, and from port 0b to IOMA port 3.
- D. 1. Insert a cable from right controller port 0a to IOMB port 2, and from port 0b to IOMA port 4. 2. Insert a cable from left controller port 0a to IOMA port 2, and from port 0b to IOMB port 4. 3. Cable the out-of-band ACP.
Answer: C
NEW QUESTION # 44
You have just racked a new 6-node switched cluster with ONTAP 9.7. You need to configure the cluster switches.
In this scenario, which two elements would be used to complete the configuration? (Choose two.)
- A. rlogin
- B. serial port
- C. SSH
- D. SFP+ port
Answer: B,C
NEW QUESTION # 45
Which two NetApp features encrypt storage data? (Choose two.)
- A. NVE
- B. NSE
- C. TPM
- D. NVMe
Answer: A,B
NEW QUESTION # 46
Click the Exhibit button.
Referring to the exhibit, what information is forwarded to syslog after you enter the scripted install commands? (Choose two.)
- A. command history
- B. EMS messages
- C. AutoSupport messages
- D. SNMP traps
Answer: A,C
Explanation:
Explanation/Reference: https://www.netapp.com/media/10674-tr4569.pdf
NEW QUESTION # 47
You have an AFF A400 cluster that is running ONTAP 9.7 software. You are asked to set up FlexCache for NFS volumes.
In this scenario, which statement is correct when implementing FlexCache?
- A. A subscription license is required.
- B. A capacity license is required.
- C. No license is required.
- D. A site license is required.
Answer: B
NEW QUESTION # 48
......
NS0-183 Exam Questions and Valid NS0-183 Dumps PDF: https://testking.exams-boost.com/NS0-183-valid-materials.html